Rembam DT01281 Original Quality Projector Lamp with Housing for HITACHI CP-SX8350 CP-WUX8440 CP-WX8240 CP-X8150
  • Rembam DT01281 Original Quality Projector Lamp with Housing for HITACHI CP-SX8350 CP-WUX8440 CP-WX8240 CP-X8150
  • Rembam DT01281 Original Quality Projector Lamp with Housing for HITACHI CP-SX8350 CP-WUX8440 CP-WX8240 CP-X8150
  • Rembam DT01281 Original Quality Projector Lamp with Housing for HITACHI CP-SX8350 CP-WUX8440 CP-WX8240 CP-X8150
  • Rembam DT01281 Original Quality Projector Lamp with Housing for HITACHI CP-SX8350 CP-WUX8440 CP-WX8240 CP-X8150

    Current Category:USB Gadgets

    USD 79.99USD 55.99
    Quantity:
    raheladrusko.com

    Products Description

    • ☀Rembam Projector Lamp Assembly with Premium Quality Genuine OEM Original Bulb Inside
    • ☀Lifetime:4500 hours life time and 180 days warranty
    • ☀Install:is easy and quick for your installation to make sure your device is back in action
    • ☀Guarantee:Take strict test before delivery.Excellent return service and friendly customer service.Any other problems with the projector lamp,please contact us.
    • ☀Compatible projector:for HITACHI CP-SX8350 HITACHI CP-WUX8440 HITACHI CP-WX8240 HITACHI CP-X8150


    Rembam Information:

    Rembam has own factory and many experienced workers.The OEM bulb is engineered to perform to the exact specifications and requirements.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.

    Specifications:

    Part number:DT01281

    Wattage:170W

    Specification:E19.4

    Application:Business/Education/Home/School

    Compatible:for HITACHI CP-SX8350 HITACHI CP-WUX8440 HITACHI CP-WX8240 HITACHI CP-X8150

    Package:

    1 original bulb with housing

    1 Instructions sheet

    Installation:

    1.Use a screwdriver to remove the screw from the cover.

    2.Push up and remove the cover.

    3.Remove the lamp protection film.

    4.Remove the screw that secures the lamp module.

    5.Disconnect the lamp connector from the projector.Lift the handle so that it stands up. Pull out the lamp module by force.

    Notes:

    1).To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb.The bulb may shatter and cause injury if it is dropped.

    2).To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.

    3).We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.

    Recommended products